Fuse Box / POS Lead Repair NPS50

[drewpschlong]

Trying to revive a theft recovery and am having no luck finding the replacement plastic fuse block/positive lead, short of buying a harness.  If anyone has a source for the plastic blocks that I could pin in my existing LMK, or a good used off a damaged harness and am now looking for other solutions to repairing the unit.


I have a cover cap incoming.  I am thinking of brazing on a piece of bent copper as shown in my image but am open to better solutions, or a good used replacement piece.  








    





This shows both sides of the damage.   Do you think it could be fixed with a copper ring terminal    , or flat copper sheet piece?

[Baizy]

Anything can be fixed with patience and skill, but finding a good used harness is probably your best bet. I have done some sketchy stuff before so if it's a budget build, do what you can without setting your bike on fire!