|
Post by rick_audible on Jun 3, 2012 11:51:12 GMT -5
Thanks. I'm going to get a smaller plate soon. Older UK bikes can wear one half the size but the Police have Auto Number Plate Recognition now so you face a £30 fine if you have one on a newer bike. Worth it to get rid of that airbrake.
|
|
|
Post by sammorales on Jun 15, 2012 10:07:40 GMT -5
Did you lower your seat?
Can you link me to where you got that grate for underseat storage?
|
|
|
Post by rick_audible on Jul 8, 2012 17:10:01 GMT -5
Seat is stock and the basket is a Honda accessory you can get from your local Honda dealer.
|
|
|
Post by rick_audible on Aug 30, 2012 14:45:37 GMT -5
I'm chucking my air box back on for the winter so took the opportunity to upgrade my Polini inlet manifold. Previous one had a hole in it that had been repaired with a screw and silicone. Got a brand new one for £10 so hoping it will mean better undisturbed air flow. The other one is going on my Wife's to replace the stock one on her box, anything is an improvement over that regardless of repair. I finally got a smaller plate too. ;D
|
|
|
Post by rick_audible on Oct 7, 2012 11:38:00 GMT -5
KCP Coolant Bottle fitted. Great bit of kit. Small plate is on too.
|
|
|
Post by chanito on Oct 7, 2012 14:44:49 GMT -5
;D That is the first overflow bottle i really like ;D
|
|
|
Post by rick_audible on Oct 7, 2012 17:09:08 GMT -5
Thanks Chanito. Kelvin makes some really nice stuff and us Brits don't get stung for import tax as he's just across the water in Holland.
|
|
|
Post by rick_audible on Nov 11, 2012 12:40:54 GMT -5
Put Baotian Fender on and stole the Wife's Yellow battery box. May keep it:
|
|
|
Post by rick_audible on Dec 16, 2012 12:30:40 GMT -5
Finally swapped over the Dorf and Seat from the Wife's to mine. Feels like I'm getting a couple of extra MPH now that I'm not acting as an airbrake. Keeping the yellow box. I like it. PegLegs next.
|
|
|
Post by rick_audible on Jan 6, 2013 10:58:30 GMT -5
|
|
|
Post by rick_audible on Jan 9, 2013 15:27:44 GMT -5
NCY Stretch kit in progress. Finished late so more photos to come.
|
|
|
Post by rick_audible on Jan 10, 2013 12:08:51 GMT -5
|
|
|
Post by Dandy Dan on Jan 20, 2013 22:17:47 GMT -5
Looking great. Where did you snag that fender?
|
|
|
Post by rick_audible on Jan 22, 2013 4:06:20 GMT -5
|
|
|
Post by rick_audible on Jan 31, 2013 11:02:50 GMT -5
Renthal Bars arrived today. Ultra Low Road.
|
|
|
Post by rick_audible on Feb 1, 2013 19:20:11 GMT -5
I got a Turtlehead in the rear. Time to get rid of that JiangWayne seat and the light cluster.
|
|
|
Post by rick_audible on Feb 3, 2013 8:50:03 GMT -5
Stock seat with Turtlehead fitted to Dorf frame. Time for some cutting but it'll have to wait.
|
|
|
Post by rick_audible on Feb 9, 2013 12:04:20 GMT -5
Had some powder-coat done. Glossed the Light Frame, DORF and Dingleberry before I chop the rear light stem off. Matted my controls and NCY Stem while I was at it. Managed to fit left one, light frame and stem before it rained. Pretty obvious it's a drastic improvement on stock.
|
|
|
Post by rick_audible on Feb 14, 2013 10:36:08 GMT -5
Light Stem is gone and Dingleberry is in it's place with LED Plate Lights. Wiring up the Turtlehead next.
|
|
|
Post by rick_audible on Feb 14, 2013 12:55:18 GMT -5
Dorf back on. Turtlehead wired up. Works perfectly. Quality MNNTHBX products.
|
|