|
Post by nbstunter on Oct 5, 2008 22:25:34 GMT -5
so i got this "v8" pipe from Taiwan for my 03 ruckus and i have tryed it with the stock jet ran like crap was slower then before tryed a 80 jet ran like crap even worse tryed 85 wouldnt even rev up onto the main jet so i put the 80 back in and put a k&n filter right off the end of the carb and it still runs like crap so i put the old pipe on runs great but the new v8 pipe still wont make it go past 40 KPH im going to try somemore messing with the idle mix screw but i dont know where it should be i have played with it so much trying to get it to work i have no clue where stock is, any help here would be thankful. thanks!
|
|
|
Post by Firegut on Oct 6, 2008 5:00:55 GMT -5
I think 2 and 1/8 turns out is stock. You probably need a larger slow jet with idle mix tuning.
|
|
|
Post by jedisabre7 on Oct 6, 2008 7:43:02 GMT -5
well, if it ran worse with richer jets, try leaning it up.
|
|
|
Post by nbstunter on Oct 6, 2008 21:37:24 GMT -5
well i got a 75 [stock] jet coming in and a 70 jet and ill get a few bigger slow jets thanks
|
|