delslo
Junior Ruckster
Posts: 81
|
Post by delslo on Oct 4, 2008 16:47:12 GMT -5
09 Honda Ruckus Bought it from dealer with 1 mile on it two weeks ago... I busted 75 miles on the first night... Completely stock for now... Enjoy fellow Rucksters  It loves the lake...  Behind a dept store near by...   Anyone thinking Fast and Furious?   Respect the Ruckus!  Here we have the Eco-friendly Ruckus in its natural environment... Try not to piss it off though... They can be quite fierce with its 49cc...   |
|
|
|
Post by chanito on Oct 4, 2008 19:50:49 GMT -5
;D ;D Great pics. Thanks ;D ;D
|
|
inkerb2b
Junior Ruckster
b2b crew... Graff since 1982
Posts: 88
|
Post by inkerb2b on Oct 4, 2008 20:29:42 GMT -5
dope pics... It lo0ks co0l on the dirt... I got the same, 09 red... Ima post pics as so0n as my parts arrive
|
|
delslo
Junior Ruckster
Posts: 81
|
Post by delslo on Oct 4, 2008 20:58:13 GMT -5
Just took the rear fender off and red pin striped the wheels and front fender... looks better w/o the rear fender and the 1/4" red strip on the wheel lip sets those factory steelies off like a rocket... funny part... I just picked of red strips at Advance got home and guess what? SAME EXACT COLOR AS THE RUCKUS! Can't wait til the chanito windshield comes in...
|
|
|
|
Post by Kami no Chiizu on Oct 4, 2008 22:33:42 GMT -5
Nice pix. Thanks for sharing.
The Ruckus really is the beauty and the beast.
|
|
delslo
Junior Ruckster
Posts: 81
|
Post by delslo on Oct 11, 2008 13:46:22 GMT -5
Got the Chanito windshield in yesterday... I installed it today with the expectation of great things... Well I was wrong... The windshield looks good and its easy to install... But I didnt get the normal ~2mph boost that about everyone said it gives... But... What i did get was a 5mph boost up hills ;D and I'm hitting the rev limiter Alot sooner ;D! Now please understand, its windy and trying to rain in Central GA so my numbers are a little low... Cant wait to post up pics of this AWESOME windshield... THANKS CHANITO! Other mods done today... Briggs and Stratton Air Filter Turn Signal Relocation Split the floor board and under tray to make carb tuning easier Lowered the factory seat Made the Vari/Clutch Bell Tool Tried to locate the front fender lower to the tire but I could figure it out (Any one done this?)  Was going to change the plug and wire but the plug is ordered and the wire is part of the coil... I might wire in an MSD coil instead ... |
|
|
|
Post by thunderstRuck on Oct 12, 2008 7:05:23 GMT -5
You need to re-drill the holes in the fender to match the lower tubes. Put some hose clamps on so the fender doesn't slip down and use zip ties on the top.
|
|
delslo
Junior Ruckster
Posts: 81
|
Post by delslo on Oct 13, 2008 22:30:31 GMT -5
thats what I thought... I might do that this Saturday... Changing the plug and oil tomorrow... Will take pics after work...
|
|
