|
Post by puddlejumper on Aug 10, 2008 20:01:25 GMT -5
Not really sure what the proper category would be for this so hope it works here. While I've got my motor apart I was wondering if there is a place in either the head or the engine that one could drill and tap for a second temperature sensor that would go to a gauge? There is a local ruckster machinist that I could probably convince to help out on this.
|
|
sr50r
Ruckster
Posts: 281
|
Post by sr50r on Aug 10, 2008 20:50:05 GMT -5
You dont have to drill a new hole, just use the current hole to mount a T fitting to mount the two senders on the same hole.
|
|
|
Post by puddlejumper on Aug 10, 2008 21:22:12 GMT -5
Don't think theres enough room there where I'd be comfortable doing that. What about redrilling and tapping the coolant drain hole on the left side of the motor?
|
|