Post by William on Mar 7, 2005 21:38:47 GMT -5
The second day i had my ruckus, the first key I was using wouldent go into the ignition all the way. Upon closer inspection I noticed a small curly bur apariently left from milling the large groov on both sides of the key. I used a micro file and took that booger off. Works fine.
I was also having problems unlocking the steering colum until I realized that the key goes in at a slight angle instead of straight up and down (like when the key is turned all the way to the start position) it's less than 180 degrees from on.
Just thought I would share this stuff with yall incase anyone was new like me and had the same problems.
I was also having problems unlocking the steering colum until I realized that the key goes in at a slight angle instead of straight up and down (like when the key is turned all the way to the start position) it's less than 180 degrees from on.
Just thought I would share this stuff with yall incase anyone was new like me and had the same problems.
