|
|
Post by timberwolfmadcat on Apr 26, 2006 18:50:37 GMT -5
Ill be making em tommorow, so wish me luck. I had this bloody brilliant idea on the parts to use. So far this has cost me $10 for the pegs $8 for the aluminum plate $6 for the latches $1 for the bolts to hold the pegs $5 for white spraypaint I still need a couple little things as far as fasteners and such goes, ill be grabbing em tommorow. My engineering brain is back since im done school now, i got some time to tinker around with wicked stuff and mods  |
|
|
|
Post by Dandy Dan on Apr 26, 2006 22:29:49 GMT -5
If your engineering brain can figure out a decent way to use a footpeg and the BSS Kickstand on the same side I'd be a big fan.
|
|
|
|
Post by Kami no Chiizu on Apr 27, 2006 0:44:54 GMT -5
Jeez, how much is Krylon in Canadia?
|
|
|
|
Post by timberwolfmadcat on Apr 27, 2006 18:01:23 GMT -5
Rock on, ive got one done now, ill do the how to tommorow, seeing as i still need to work on mounting them to the floorboard, the T's i bought arent long enough  so ill have to figure something out, they dont look as nice as i had envisioned, maybe ill just get some new 3/8" bolts and mount em where everyone else has |
|
|
|
Post by chanito on Apr 27, 2006 19:59:56 GMT -5
 waiting 
|
|
|
|
Post by timberwolfmadcat on Apr 28, 2006 0:18:08 GMT -5
meh, it doesnt look nearly as clean as with them mounted below. And it was way more pricy, i really got to find some decent clip ins, it would work much nicer than trying to click a bracket. I like them where they are mounted now with just a 3/8 bolt and a couple washers on the pegs. It cost me all of $15 for the pegs, washers, and bolts. Its nearly $40 for the clips, aluminum brackets, screws, bolts, etc.. Ill have to see where i prefer them mounted. As for clean it gets no better than with them just bolted near the radiator under the floorboard in the holes there, its a nice change riding position wise.
|
|
|
|
Post by timberwolfmadcat on Apr 28, 2006 15:16:51 GMT -5
ive changed my strategy around on the removable, i should have them working wicked good by later on today, heres some piccys with them mounted underneath in the normal spots   |
|
|
|
Post by timberwolfmadcat on Apr 28, 2006 21:39:21 GMT -5
i still like them mounted under the floorboard more, im done them now, im just waiting for the paint to dry. I took all the pics along the way, ill be doing the how to tommorow, assuming all goes well at work........ Under the floorboard takes all of 10 mins to install, looks sweet and really pretty, and the difference in riding position was awesome, i dont know how i rode without pegs before Not to mention cost me all of $15 to do The removable too me are a lot more difficult to make, and they do look really nice though, but they are pricy, the parts and suchforth cost me around $45 to do it, and about 5 hours or so in labour if i had done it right the first time as far as mounting goes.... |
|
|
|
Post by chanito on Apr 30, 2006 12:07:57 GMT -5
:)Nice job, i am impressed as how you guys manage to keep extra clean garages ;D
|
|
|
|
Post by timberwolfmadcat on Apr 30, 2006 16:47:37 GMT -5
lol, you havent seen the inside of my garage yet  And im working on piccys of the removable I havent forgotten, i snapped a clip and have to get a new one, small difficulty |
|
|
|
Post by Kami no Chiizu on Apr 30, 2006 22:27:00 GMT -5
:)Nice job, i am impressed as how you guys manage to keep extra clean garages ;D They aren't real garages... |
|
|
|
Post by timberwolfmadcat on May 7, 2006 22:52:12 GMT -5
|
|
|
|
Post by timberwolfmadcat on May 7, 2006 22:54:01 GMT -5
BTW im not going to do a how to on this, because i feel it was wayyyyy to difficult to do, unless i can manage to get them mounted further out near the wheel without them popping out.........
|
|
|
|
Post by chanito on May 8, 2006 1:14:46 GMT -5
;D Nice work, i need to fabricate something like that but mount the pegs a little forward ;D ;D
|
|
|
|
Post by Kami no Chiizu on May 8, 2006 4:34:25 GMT -5
Yeah, that's way to close to the seat to be good...
Not to belittle your work or anything... ;D
They look decent, though...
|
|
|
|
Post by timberwolfmadcat on May 8, 2006 20:26:15 GMT -5
Yeah, thats why im taking just a flat bracket and pushing them out near the wheel The stupid things keep coming unclipped though, b/c theyre too far forward Im gonnna see if i can handle a door latch on the back just to hold it down |
|
|
|
Post by timberwolfmadcat on Jun 19, 2006 22:14:25 GMT -5
Yeah, this was a stupid idea, way to expensive and annoying to get them to stay, maybe a little clip on the back, im too lazy to care about it anymore. Just go with the nice BMX pegs on the 3/8 Bolt with a polzi nut and lockwasher, and be grateful.
|
|
|
|
Post by Kami no Chiizu on Jun 19, 2006 22:44:22 GMT -5
|
|
|
|
Post by Blackruk on Jun 20, 2006 6:22:50 GMT -5
|
|
|
|
Post by Kami no Chiizu on Jun 20, 2006 14:22:20 GMT -5
Looks good, br.
|
|
