|
|
Post by xela2004 on Aug 7, 2006 0:22:44 GMT -5
Any one here know what the stock cam timing specs are on the Ruckus and metro?
|
|
|
|
Post by chanito on Aug 7, 2006 23:20:32 GMT -5
 I will look them up and post them tomorrow ;D
|
|
|
|
Post by chanito on Aug 20, 2006 9:45:09 GMT -5
Ok here they are, this are the specs with the valves 1mm off the seat. Intake: Opens at 10 degrees before top dead center and closes at 15 degrees after bottom dead center Exhaust: Opens at 20 degrees before bottom dead center and closes at 10 degrees after top dead center Just in case some might need the cam lobe height is 29.32 mm in the intake lobe and 29.35 on the exhaust sorry for the delay, but i have been extremely busy 
|
|
