riles
n00b Ruckster
Posts: 1
|
Post by riles on May 19, 2012 14:27:33 GMT -5
Hey, I'm new here and am obviously a noob. I was wondering how I would go about wiring two 12 volt led strips to the battery. Would I connect directly to the battery or somewhere else. Thanks
|
|
|
Post by chanito on May 20, 2012 15:09:24 GMT -5
You will need a realay or at the very least a switch (you can get away with only a switch with LEDs, due to their low amp consuption)
|
|
|
Post by griff85 on Jun 5, 2012 0:12:45 GMT -5
You can wire them directly to the battery, which is what I did... But as an extra precaution I used a 'fused link', and switch when doing so.
You can also wire them up to your headlights if you feel like going through the headache of trying to figure out the wiring diagram...
|
|