|
|
Post by njcustom on Apr 6, 2010 1:33:00 GMT -5
just showin a pic of what i made today.. powder coated too.. im having trouble adding multiple pics.. Attachments:
|
|
|
|
Post by njcustom on Apr 6, 2010 1:35:46 GMT -5
before and after Attachments:
|
|
|
|
Post by Dandy Dan on Apr 7, 2010 1:12:12 GMT -5
Nice stuff. Be careful leaning to hard into corners with these. It's possible to scrape a peg if you are leaning way over and this takes the weight off the tires so you can slide out.
|
|
|
|
Post by njcustom on Apr 7, 2010 14:27:04 GMT -5
it pretty much has to fall over to scrap.. i made sure of this .. thanks
|
|
|
|
Post by Dandy Dan on Apr 11, 2010 16:11:21 GMT -5
Keep in the suspension in mind if you haven't. Under hard cornering the suspension can compress about 2", so the scoot will sit about 2" lower and thus scrape at a lower angle.
|
|
|
|
Post by njcustom on Apr 12, 2010 20:56:25 GMT -5
ive gotten to the edge of the tire and no scrap..
|
|
|
|
Post by chanito on Apr 12, 2010 20:59:37 GMT -5
;D Good, somewhere in here there is a video of Originaljoie, proving that scraping the foot-pegs can be hazardous to your health  |
|
|
|
Post by Kami no Chiizu on Apr 12, 2010 22:33:55 GMT -5
;D Good, somewhere in here there is a video of Originaljoie, proving that scraping the foot-pegs can be hazardous to your health Ah, he'd have went down even without the pegs. Just went in that turn too hot. |
|
