sr50r
Ruckster
Posts: 281
|
Post by sr50r on Mar 30, 2010 5:59:27 GMT -5
I don't really need most of the stuff from the shop manual, but I could really use the torque tables for the crankcase and head fastners.  |
|
|
|
Post by chanito on Mar 30, 2010 13:45:55 GMT -5
 Both are 104 inch-pounds The spec are given in foot-pounds (9), but they should be torque with an inch pound wrench, to keep from over torquing, as those long 6mm bolts WILL STRETCH
|
|
sr50r
Ruckster
Posts: 281
|
Post by sr50r on Mar 30, 2010 16:58:44 GMT -5
Sweet.
I was driving home and I realised that no that wasn't all the info I needed. I wonder if you could post the ring gap specs (since I'm putting new rings in)?
|
|
lazymorulz
n00b Ruckster
07 white camo Rucko
Posts: 35 
|
Post by lazymorulz on Apr 3, 2010 21:39:09 GMT -5
pm'd..
Update: You've got mail! Copy sent. Enjoy..
|
|
