|
Post by ruckrhyder2007 on May 22, 2008 0:22:22 GMT -5
can I get a how-to on installing a new rear shock, the whole thing not just replacing the spring. Thanks. PS. I own a 2007
|
|
wg2007
Junior Ruckster
Posts: 63
|
Post by wg2007 on May 22, 2008 23:57:13 GMT -5
i just attempted to do mine..the shock was wayy too big but it was free. i went for it and failed. but the process went something like this:
put Mr Ruckus on the center stand take out the 3 bolts that hold the airbox on (10mm) take off the seat frame (12mm) - unless you can get to the bolt for the top of the shock...i couldnt quite get to it unbolt the bottom of the shock (12mm) - push the airbox out of the way, but you dont need to disconnect any of the hoses unbolt top of shock (14mm) then bolt the top of the new shock in bolt the bottom back in - you may need to lift up the rear frame to get the bottom of the shock in its place. an extra set of hands would be wonderful bolt the seat back on and the airbox done.
|
|
surfin
n00b Ruckster
Posts: 38
|
Post by surfin on Jul 26, 2008 23:11:39 GMT -5
dude its so easy just look at the shock on the ruckus and its like common sense from there
|
|
squeek
Junior Ruckster
Posts: 59
|
Post by squeek on Aug 15, 2008 0:13:42 GMT -5
i'll second (surfin)
|
|
|
Post by Dandy Dan on Aug 15, 2008 15:25:54 GMT -5
Basically you unbolt the old shock and then bolt in the new one. The only other step is that you might want to loosen the airbox first for easier access.
|
|