Jets for the Big Ruck

[tfazio]

First, does anyone know what kind of carberator the Big Ruckus uses? I assume it is the same as the Reflex as the Jet Part numbers are the same.

Second, can anyone that has purchased any PS250 Jets 40 thru 50 and 98 thru 110 provide the honda or third party part numbers for the jets.


Thanks all!

[Dandy Dan]

The BR uses a CV type carb...you can view the exploded diagram at HaydenHonda:

www.haydenhonda.com/fiche_section_detail.asp?category=Scooters&make=Honda&year=2006&fveh=7166

Just go to the Carb section...as for the jets...for the little Ruckus the last four digits of the part number are: ....0750 which corresponds to the jet size (75 jet). If you can find out the part number for the BR main jet (ronayers.com -> OEM Parts -> Microfiche might do it) then if it appears to be the same format then you could try changing those numbers to the sizes you need keeping in mind that you need to get the increments correct. There would be a 100 and a 105 but the inbetween size might be a 102 or a 103 for example so you might have to trial and error it. On the first link (hayden Honda) you can look up parts by the part number so if you find out the main jets part number you can trial and error the modified part numbers here to see what comes up. Good luck!

[bodgeous]

Stock part number for the stock jet is 99101-KTB-0980.

The last 4 numbers are the size, in this case 98 is the jet size. Standard progressions are 92, 95, 98, 100, 102, 105, 108, 110, etc. For a 102 main jet, the number would be 99101-KTB-1020.