|
|
Post by useraale on Feb 15, 2017 21:13:01 GMT -5
I have a 2007 ruck with a get. I cannot get this thing past 27 mph. It has intake, exhaust, cdi, variator, 5.5 gram weights, and big jets. I have the valve lash spot on, brand new 94 octane fuel in the tank, fresh oil change to the appropriate level, and tire pressure is good. Only thing that raises a huge flag to me is 40 psi on a compression test. What else am I missing? Why can I only go 27 mph? Thanks in advance for any help or advice.
|
|
|
|
Post by useraale on Feb 15, 2017 21:18:04 GMT -5
I drew on the variator with sharpie to check that and the belt is going almost all the way out.
|
|
|
|
Post by chanito on Feb 16, 2017 20:28:51 GMT -5
You need to do a leak down to isolate the cause of the low compression. maybe a valve or rings, but 40 psi is WAY LOW for a GET engine
|
|
|
|
Post by useraale on Feb 17, 2017 15:37:30 GMT -5
Thanks I have a leak down tester wasn't sure if it would work on a small engine.
|
|
|
|
Post by chuckd on Apr 1, 2018 20:57:08 GMT -5
You need to do a leak down to isolate the cause of the low compression. maybe a valve or rings, but 40 psi is WAY LOW for a GET engine What is the range of good compression on a GET? |
|
