|
Post by rparkin986 on Dec 1, 2014 2:53:00 GMT -5
Hi I'm new to the threads. I recently purchased a ruckus brand new it has 100 miles. I changed the handle bars tonight after doing so it will not start. I turn key and you can hear fuel pump kick on but nothing else. I also removed the speedo and front turn signals as well. Didn't know if that would be the problem or not. Also when I turn the key to the on position the rear turn signal is stuck on. Any help or pointers on what to check would be great thank you in advance.
|
|
|
Post by rparkin986 on Dec 1, 2014 2:57:05 GMT -5
Also removed the turn signal indicator light. Just don't know what else to tell you.
|
|
|
Post by chanito on Dec 1, 2014 7:09:47 GMT -5
In order for the starter to work you need to press one of the brake levers, they have a switch inside that closes when you squeeze the levers, more than likely they are not working. So check your connection for those two switches
|
|