|
Post by Ron Rucks on Jul 20, 2014 16:27:55 GMT -5
Hey Everyone!
My ruckus has sat for two years now, so I'm just getting her cleaned up. I have the carb pulled apart.
Wondering if anyone could help with what size jets I should be buying. I soaked the two jets overnight, the large one seems good, the smaller one is ok I finally see a tiny pin hole through the center. I'm thinking I should replace that one.
Do you know what size that may be? I have the CDI and a K & N Filter at this point. I have a polini variater and new weights but haven't installed them yet.
I hope to have her running soon. I ordered a new plug and fuel filter, looks like I should pick up a new gasket for the carb as well.
I'm thinking new antifreeze and oil change, anything I'm missing here?
Any advice on what I may need would be greatly appreciated. This is my first attempt at anything like this.
Thanks
|
|
|
Post by Cocker on Sept 23, 2014 10:27:51 GMT -5
I am having mine done partially by Honda. One thing I am doing is pulling the gas tank off and cleaning it.
|
|