|
Post by rick_audible on Mar 28, 2012 16:29:28 GMT -5
'11 UK Zoomer EFi 2 Zoomers to keep on the road so mods happen slowly when cash is available. This is what's happened so far: Kitaco iMap EFi CDI Kitaco Powerdrive Type III Variator Kitaco Belt Yoshimura Carbon TRC Full Exhaust TTO Tach with Muvi Mount Dr. Pulley Sliders K&N Intake and Breathers NCY Stretch Kit RRGS Lowdown Front Forks Baotian Front Fender Kitaco B250A Rear Shock 12" G-Craft with Kymco Hub PWJDM: Anti-Flexes, Kickstand, Rad Grill, Ignition, Pegs, Axle Spools and Plate Mount. KCP: Coolant Bottle and Rad Cap MNNTHBX: DORF Frame, Peglegs, Turtlehead, Dingleberry and RRGS Drum Adaptor Maxxis Rubber Yellow Battery Box with LED Indicators Front LED Strip Indicators Black Powdered NCY Handlebar Stem NCY Speedo Mount. Renthal Bars Black Powdered Controls Samco Hoses iPhone Mount & Flush 12v Power ProBolt Washers/Allens Alarm, Immobilizers, Tracker, Chains, GripLock, DNA "edit profanity" and a fuckin' angry Guard Dog. (Fall/Winter Kit: K&N Drycharger or Custom K&N Panel Air Box with Polini Inlet Manifold) Updated Nov '13 Attachments:
|
|
|
Post by rick_audible on Mar 28, 2012 19:16:36 GMT -5
Rear. Huge UK plate mandatory. Attachments:
|
|
|
Post by rick_audible on Mar 28, 2012 19:18:22 GMT -5
Kitaco B250A Shock. Attachments:
|
|
|
Post by rick_audible on Mar 28, 2012 19:19:58 GMT -5
Custom K&N Panel. Attachments:
|
|
|
Post by rick_audible on Mar 29, 2012 3:38:22 GMT -5
Tucano Urbano for the less pleasant weather the UK has to offer. Attachments:
|
|
|
Post by rick_audible on Mar 29, 2012 3:44:19 GMT -5
Schwinn Buddy seat attached to Honda Rear Carrier for when the Wife jumps on. Attachments:
|
|
|
Post by chanito on Mar 29, 2012 9:34:30 GMT -5
|
|
|
Post by rick_audible on Mar 31, 2012 16:14:44 GMT -5
I'm interested. In your emptied out stock exhausts too. It's all on the list.
|
|
|
Post by rick_audible on Apr 3, 2012 3:42:16 GMT -5
Polini Inlet finished up. Whipping it off again for a K&N breather setup later this week. Got a K&N intake on the way too. Attachments:
|
|
|
Post by rick_audible on Apr 17, 2012 18:37:49 GMT -5
Box K&N Panel filter has a little Breather Buddy. Attachments:
|
|
|
Post by rick_audible on Apr 17, 2012 18:42:58 GMT -5
Kitaco Powerdrive Kit arrived today. Attachments:
|
|
|
Post by rick_audible on Apr 17, 2012 18:44:30 GMT -5
along with this li'l black box..... Attachments:
|
|
|
Post by Natron on Apr 20, 2012 1:04:05 GMT -5
Lookin good man. I like the intake.
|
|
|
Post by rick_audible on Apr 20, 2012 13:59:21 GMT -5
iMap installed. No chance of a test yet thanks to London's rainy spell. Attachments:
|
|
|
Post by rick_audible on Apr 20, 2012 14:02:36 GMT -5
Lookin good man. I like the intake. The K&N is a breather so not intaking much through it at all. The box K&N is doing the work until the sun comes out.
|
|
|
Post by rick_audible on Apr 20, 2012 14:04:52 GMT -5
Intake setup for later. Variator first so I can see if they add any increase. Attachments:
|
|
|
Post by rick_audible on Apr 22, 2012 6:53:56 GMT -5
Revised my 12v power socket. Drilled box so it's flush. Attachments:
|
|
|
Post by rick_audible on May 9, 2012 17:13:25 GMT -5
Kitaco Variator Kit is in and working well until lighter weights turn up. My brother returned from Phoenix AFB with the li'l package I had sent to him while he was serving there with the RAF. PWJDM Ignition Cylinder: PWJDM Anti-Flex Bushings/Radiator Grill: PWJDM Kickstand/Pegs:
|
|
|
Post by rick_audible on May 27, 2012 6:57:40 GMT -5
K&N Air Filter/Hose: K+N Breather Filter: Ducktail/Fender Strut modded from airbox: Profile:
|
|
|
Post by FishMuffin on Jun 2, 2012 9:06:05 GMT -5
She's gorgeous! That UK plate is comically large ^_^
|
|